LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2004 >> Altima SL, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 254 (Engine Control System - DTC) >> DTC P0121: TP Sensor >> DTC Confirmation Procedure >> Procedure For Malfunction A >> With CONSULT-II
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

With CONSULT-II

WARNING: This page is about a different car, the 2004 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch ON.
  2. Select "DATA MONITOR" mode with CONSULT-II.
  3. Start engine and let it idle for at least 10 seconds.

    If idle speed is over 1,000 RPM, maintain the following conditions for at least 10 seconds to keep engine speed below 1,000 RPM.

    Fig 1: Test Parameters
    G00875921Courtesy of NISSAN MOTOR CO., U.S.A.
  4. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
scientia non olet · About LEMON Manuals