LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 588 (Engine Control System - Coupe) >> DTC P1273, P1283: A/F Sensor 1 >> DTC Confirmation Procedure >> With Consult-II
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

With Consult-II

WARNING: This page is about a different car, the 2005 Infiniti G35. However, it is still accessible from the selected car via links, so may be relevant.
  1. Start engine and warm it up to normal operating temperature.
  2. Turn ignition switch OFF and wait at least 10 seconds.
  3. Turn ignition switch ON and select "SELF-LEARNING CONT" in "WORK SUPPORT" mode with CONSULT-II.
  4. Clear the self-learning coefficient by touching "CLEAR".
  5. Turn ignition switch OFF and wait at least 10 seconds.
  6. Start engine and keep the engine speed between 3,500 and 4,000 RPM for 1 minute under no load.
  7. Let engine idle for 1 minute.
  8. Keep engine speed between 2,500 and 3,000 RPM for 20 minutes.
  9. If 1st trip DTC is detected, go to Diagnostic Procedure .
    Fig 1: Selecting "SELF-LEARNING CONT" In "WORK SUPPORT" Screen Display
    G02333937Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals