LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1886 (Automatic Transmission) >> DTC P0725 Engine Speed Signal >> DTC Confirmation Procedure >> with CONSULT-II
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

with CONSULT-II

WARNING: This page is about a different car, the 2006 Nissan Xterra. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch "ON" and select "DATA MONITOR" mode for "A/T" with CONSULT-II.
  2. Start engine and maintain the following conditions for at least 10 consecutive seconds.

    VHCL SPEED SE: 10 km/h (6 MPH) or more ACCELE POSI: More than 1/8 Selector lever: "D" position 

  3. If DTC is detected, go to "DIAGNOSTIC PROCEDURE ".
Fig 1: Consult-II SELECT SYSTEM Display Screen
G04083859Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals