LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 111 (Engine Controls - Self-Diagnostics) >> Diagnostic Tests >> DTC P2135: Throttle Position Sensor >> DTC Confirmation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2003 Nissan Altima. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: If DTC confirmation procedure has been previously conducted, always turn ignition switch OFF and wait least 10 seconds before conducting the next test. Before performing the following procedure, confirm that battery voltage is more than 10V at idle.
NOTE: For diagnostic procedure, see DIAGNOSTIC PROCEDURE .

For DTC confirmation procedure, see Fig 1.

Fig 1: Identifying DTC Confirmation Procedure For DTC P2135: Throttle Position Sensor
G00266197Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals