LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Sentra SE-R Spec V >> Repair and Diagnosis >> External Pages >> Different car >> Section 1976 (Engine Control System - VK45DE) >> Trouble Diagnosis >> ECM Terminals and Reference Value >> Preparation
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

ECM Terminals and Reference Value: Preparation

WARNING: This page is about a different car, the 2005 Infiniti FX45. However, it is still accessible from the selected car via links, so may be relevant.
  1. ECM is located behind the passenger side instrument lower panel. For this inspection, remove passenger side instrument lower panel.
  2. Remove ECM harness connector.
    Fig 1: Removing ECM Harness Connector
    G02361340Courtesy of NISSAN MOTOR CO., U.S.A.
  3. When disconnecting ECM harness connector, loosen it with levers as far as they will go as shown at right.
  4. Connect a break-out box (SST) and Y-cable adapter (SST) between the ECM and ECM harness connector.
    • Use extreme care not to touch 2 pins at one time.
    • Data is for comparison and may not be exact.
    Fig 2: Loosening Lever
    G02361341Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals