LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2003 >> Frontier Base, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls - Self-Diagnostics >> Diagnostic Tests >> DTC P1400: EGR Control Solenoid Valve >> DTC Confirmation Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Confirmation Test

  1. Start engine and warm to normal operating temperature. Select DATA MONITOR mode with scan tool.
  2. Maintain the following conditions for at least 5 consecutive seconds:
    • ENG SPEED: less than 3000 RPM.
    • B/FUEL SCHDL: less than 12.6 msec.
  3. If 1st trip DTC is detected, go to DIAGNOSTIC PROCEDURE  . If 1st trip DTC is not detected, system is okay at this time.