LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 2002 >> Sentra SE-R Spec V >> Repair and Diagnosis (Single Page) >> Body & Frame >> Body, Cab Control Systems >> Body Control System >> Smart Entrance Control Unit >> Consult-II >> CONSULT-II Inspection Procedure
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

CONSULT-II Inspection Procedure

  1. Turn the ignition switch "OFF".
  2. Connect "CONSULT-II" to the data link connector.
    Fig 1: Locating Data Link Connector (DLC)
    G02053946Courtesy of NISSAN MOTOR CO., U.S.A.
  3. Turn ignition switch "ON".
  4. Touch "START".
    Fig 2: Tester Display - Start
    G02053947Courtesy of NISSAN MOTOR CO., U.S.A.
  5. Touch "SMART ENTRANCE".
    Fig 3: Tester Display - Smart Entrance
    G02053948Courtesy of NISSAN MOTOR CO., U.S.A.
  6. Perform each diagnostic item according to "DIAGNOSTIC ITEMS APPLICATION". Refer to DIAGNOSTIC ITEMS APPLICATION  .
    Fig 4: Tester Display - Diagnostic Items Application
    G02053949Courtesy of NISSAN MOTOR CO., U.S.A.
scientia non olet · About LEMON Manuals