LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1998 >> Altima SE, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - Tests W/Codes - Testing - 2.4 >> Diagnostic Tests >> DTC P0600: A/T Control >> Overall Function Test
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Overall Function Test

Start engine. Using DVOM, measure voltage between PCM connector terminal No. 24 and ground by backprobing connector. See Figure. Also measure voltage between PCM connector terminal No. 29 and ground. Voltage should be approximately 7 volts.

scientia non olet · About LEMON Manuals