LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1983 >> 280ZX Base, 2.8 C, Standard >> Repair and Diagnosis >> Engine Performance >> System >> ECC CEC System >> Testing >> Component Testing >> Oxygen Sensor Harness
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Oxygen Sensor Harness

Disconnect harness from sensor at oxygen sensor (in exhaust pipe) and connect to ground with jumper wire. Measure resistance between ground and pin 24 in control unit connector. Continuity should be measured. If not present, repair harness.

scientia non olet · About LEMON Manuals