LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1983 >> 280ZX Base, 2.8 C, Standard >> Repair and Diagnosis >> Engine Performance >> System >> ECC CEC System >> Testing >> Component Testing >> Ignition Signal Circuit
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Ignition Signal Circuit

  1. Disconnect starter motor "S" terminal and connect battery ground cable. Turn ignition switch to "START".
  2. Measure voltage between control unit connector pin 9 and ground. If battery voltage is not present, check harness and ignition coil.
scientia non olet · About LEMON Manuals