LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1982 >> 280ZX Base, 2.8L Eng VIN C, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Electronic Concentrated Engine Control >> Testing >> Component Testing >> Cylinder Head Temperature Sensor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cylinder Head Temperature Sensor

  1. With harness connected to sensor, measure between control unit connector pin 23 and ground. At temperatures above 68°F (20°C), resistance should be below 2900 ohms. At temperatures below 68°F (20°C), resistance should be above 2100 ohms. If not, repair harness.
  2. Remove sensor from head, and dip end of sensor into water at 68°F (20°C). Resistance should be 2100-2900 ohms across sensor terminals. Repeat test with water at 176°F (80°C). Resistance should be approximately 250-400 ohms.
scientia non olet · About LEMON Manuals