LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Nissan-Datsun >> 1981 >> 310 Base >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Mixture Ratio Feedback System >> Testing >> System Check >> Coolant Temperature Switch
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Coolant Temperature Switch

  1. Drain engine coolant, disconnect wiring, and remove coolant temperature switch.
  2. Connect ohmmeter leads to switch and place end of switch in a pan of water. When water temperature is below 68°F (20°C), ohmmeter should show continuity. When water temperature is above 104°F (40°C), ohmmeter should not show continuity. If switch does not operate within specifications, replace.
scientia non olet · About LEMON Manuals