LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2024 >> Outlander ES, FWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C163A-86: ADAS System >> DTC Description >> DTC Confirmation Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

DTC Confirmation Procedure

  1. PRECONDITIONING 
    1. Pull the parking brake switch.
      NOTE: Check the parking brake switch indicator is turn On.
    2. Ignition switch OFF.
    3. Get out of the vehicle and close all doors.
    4. Wait 65 seconds.
    NOTE:
    • Check the parking brake switch indicator turn OFF.
    • If the rear brake caliper is heated, wait an hour so that parking brake switch indicator does not turn OFF.

    >>

    GO TO  2.

  2. DTC REPRODUCTION PROCEDURE 

    With M.U.T.-III SE

    1. Ignition switch ON.
    2. Perform self-diagnosis for "EPS/DAST 3".

    Is DTC "C163A-86" detected? 

    YES >>

    Proceed to diagnosis procedure. Refer to DIAGNOSIS PROCEDURE .

    NO-1 >>

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 >>

    Confirmation after repair: INSPECTION END

scientia non olet · About LEMON Manuals