Section 68 (Combination Meter)
WARNING: This page is about a different car, the 2023 Mitsubishi Eclipse Cross. However, it is still accessible from the selected car via links, so may be relevant.
- Service Specifications
- Special Tools
- Diagnosis
- Diagnostic Trouble Code Chart
- Diagnostic Trouble Code Procedures
- DTC B1201: Fuel information problem
- DTC B2463: Rheostat switch sticking
- DTC B2464: Meter information SW sticking
- DTC U0100: Engine CAN timeout
- DTC U0141: ETACS CAN timeout
- DTC U0159: CAMERA CAN timeout
- DTC U0164: A/C CAN timeout
- DTC U0245: NAVI/DISP AUDIO CAN timeout
- DTC U1000: OSS/KOS_OSS CAN timeout
- DTC U1190: No receive fault detect signal
- DTC U1195 Coding not completed
- Trouble Symptom Chart
- Symptom Procedures
- Inspection Procedure 1: Power supply circuit check: Inspection Procedure 2: The odometer and the trip meter are not displayed: Inspection Procedure 3: No needle meters work.: Inspection Procedure 4: If the ignition switch is turned to the ON position, the indicator and warning lights do not illuminate normally
- Inspection Procedure 5: The speedometer does not work (the other meters work)
- Inspection Procedure 6: The tachometer does not work (the other meters work)
- Inspection Procedure 7: Tone alarms do not sound normally
- Notes
- Technical Description (Comment)
- Notes
- ACC approaching warning tone alarm/ACC automatic cancelling tone alarm/ACC vehicle-traveling-ahead missing indication tone alarm
- A/T shift cancel tone alarm
- TPMS setting tone alarm
- FCM collision warning tone alarm/FCM approaching warning tone alarm
- ASC pre high temperature warning tone alarm/ASC high temperature warning tone alarm
- Brake auto hold warning tone alarm <Vehicles with electric parking brake>
- Brake auto hold switch cancel tone alarm <Vehicles with electric parking brake>
- Electric Parking brake warning tone alarm <Vehicles with electric parking brake>
- OSS-related malfunction warning tone alarm <Vehicles with OSS>
- Engine switch reminder tone alarm <Vehicles with OSS>
- OSS Key Authentification tone alarm <Vehicles with KOS>
- Front seat belt reminder function
- Freeze warning tone alarm
- Parking brake reminder tone alarm
- Multi-information display switch or rheostat illumination button operation tone alarm
- Rest reminder tone alarm
- Turn-signal light tone alarm
- Theft tone alarm
- Light reminder tone alarm
- Door-ajar warning tone alarm
- ETACS-ECU function customize tone alarm
- LDW warning tone alarm
- Blind spot warning tone alarm <Vehicles with Blind Spot Warning [BSW] (with Lane Change Assist)>
- Rear cross traffic alert tone alarm <Vehicles with Blind Spot Warning [BSW] (with Lane Change Assist)>
- Audio operation tone alarm/A/C operation tone alarm
- Troubleshooting Hints
- Diagnosis
- Inspection Procedure 8: Fuel gauge does not work (the other meters work)
- Inspection Procedure 9: The combination meter light does not illuminate normally or the multi-information display is not displayed normally
- Inspection Procedure 10: The multi-information display screen cannot be changed with the operation of the multi-information display switch
- Inspection Procedure 11: Parking brake reminder tone alarm does not sound: Inspection Procedure 12: Brake warning light does not illuminate
- Inspection Procedure 13: Front seat belt reminder function does not work normally (driver's side)
- Inspection Procedure 14: The combination meter and instrument panel illumination does not illuminate normally
- Service Data
- Actuator Test Table
- Special Function Table
- Inspection Procedure For Each Multi Information Display Screen
- Check At Combination Meter Terminals
- On-Vehicle Service
- Speedometer Check
- Tachometer Check
- Fuel Gauge Unit Check
- Service Reminder Function Set
- How To Set By Operating Scan Tool (M.U.T.-IIISE)
- How To Operate Scan Tool (M.U.T.-IIISE)
- Extra Reminder Setting
- Extra Reminder Cancel
- Periodic Reminder Schedule Set
- Integrated Value Adjustment
- Optional Int Schedule Setting
- How To Set By Special Operation Of Switch
- How To Cancel The Service Reminder Warning
- How To Set The Schedule
- How To Inactivate The Service Reminder Function
- Combination Meter
- Multi-Information Display Switch