Keyless Entry System Inspection

Check the system as described below. If the system does not work, carry out troubleshooting. Refer to KEYLESS ENTRY SYSTEM DIAGNOSIS. 

• Operate the transmitter to check that the doors can be locked and unlocked.
• Operate the transmitter to check when the door locking or unlocking operation is performed that the hazard warning light (lock: flash once, unlock: flash twice (default setting)) and dome light (lock: flash once, unlock: illuminates for 15 seconds (default setting)) answerback operates. Refer to HOW TO REGISTER ENCRYPTED CODE. 
  NOTE:

  • The customization function allows you to change the answerback setting as follows. Prior to that check, confirm which setting is activated.
    • The hazard warning light flash once when locked and twice when unlocked (default setting).
    • The hazard warning light flash once when locked and do not flash when unlocked.
    • The hazard warning light do not flash when locked and flash twice when unlocked.
    • The hazard warning light do not flash when both locked and unlocked.
    • The hazard warning light flash twice when locked and once when unlocked.
    • The hazard warning light flash twice when locked and do not flash when unlocked.
    • The hazard warning light do not flash when locked and flash once when unlocked.