September 30: LEMON manuals is back up on a temporary server! Slowness is possible
»A« Gearshift Cable And Select Cable Assembly/Gearshift Link Clip/Select Cable Connection (Transaxle Side)/Gearshift Cable Connection (Transaxle Side) Installation
- Cross the gear shift cable and the select cable as shown and install them to the transaxle.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
CAUTION:
Securely insert the clip, shift cable, and select cable until they click into place.
- After installing the new gearshift link clip to the cable bracket of the transaxle, install the gearshift cable and select cable to the cable bracket.
NOTE:
The clip is reversible.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|
- Securely fit the tips of the gearshift cable and the select cable.
- Move the shift lever and gearshift lever to all positions and check that the operation is smooth.
 Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
|