Work Procedure

WARNING: This page is about a different car, the 2024 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.

WRITE CALIBRATION DATA
With M.U.T.-III SE
1. Select "CALIBRATING CAMERA IMAGE" of "Special Function" mode using M.U.T.-III SE.
2. After displaying the status, check that the status is displayed as "Normal".
  Is the status of each camera displayed as "Normal"?
  
  YES >>
  
  INSPECTION END
  
  NO >>
  
  Calibrate the camera that is not displayed as "normal". Refer to WORK PROCEDURE .