LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2020 >> Outlander LE, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle Overhaul >> Side Cover >> Disassembly And Assembly >> Disassembly >> Notes
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Disassembly And Assembly: Disassembly: Notes

  1. Remove the seal rings from the side cover.
    G05432005Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Ensure that the special tool MB992196 is correctly set, directly above the return springs of the spring retainer assembly.
  2. Using the special tool MB992196, remove the snap ring while pushing the spring retainer assembly.
    G05432006Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Do not remove the return springs from the spring retainer assembly.
  3. Remove the spring retainer assembly from the 2-6 brake piston.
    G05432007Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Do not feed air abruptly. Otherwise, the 2-6 brake piston may become stuck in the side cover.
  4. Feed air through the oil hole as indicated in the illustration to remove the 2-6 brake piston from the side cover.
    G05432008Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  5. Remove the D-rings from the 2-6 reverse brake piston.
    G05432009Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals