LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2017 >> Mirage ES, Standard Trans >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transaxle Overhaul >> Input Shaft >> Inspection >> Synchronizer Spring >> Speed Gears
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Speed Gears

  1. Check that the helical and clutch gear tooth surfaces are not damaged or worn.
  2. Check that the synchronizer cone surfaces are not roughened, damaged or worn.
  3. Check that the gear inside diameter and front and rear surfaces are not damaged and worn.
Fig 1: Helical, Clutch Gear Tooth Surface, Synchronizer Cone Surface And Gear Inside Diameter
G11278160Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals