LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2014 >> Outlander SE, AWD >> Repair and Diagnosis >> Electrical >> Charging Systems >> Generator Assembly >> INSPECTION - 3.0L Engine >> Rotor
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

INSPECTION - 3.0L Engine: Rotor

  1. Measure the resistance between the two slip rings of the rotor coil to check the continuity between them.

    Replace the rotor if the resistance is not within the standard value range.

    Standard value: 2.1 - 2.4 Ω 

  2. Check the continuity between the slip rings and core.
    Fig 1: Measuring Resistance Between Rotor Coil Slip Rings
    G09664738Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. If continuity is present, replace the rotor.
    Fig 2: Checking Continuity Between Slip Rings And Core
    G09664739Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals