July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Disassembly And Assembly: Notes

WARNING: This page is about a different variant/trim than selected.

Fig 1: Disassembling/Assembling Input Shaft With Torque Specification

G09641249

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Required Special Tools:

MD998917: Bearing remover
MB990842: Drag link bushing remover and installer B
MD998812: Installer cap
MD998813: Installer-100
MD998819: Installer adapter (40)
MD998822: Installer adapter (46)
MD999601: Valve stem seal installer