Special Tools
SPECIAL TOOLS CHART
| Tool | Tool number and name | Supersession | Application |
|---|---|---|---|
| MB990784 Ornament remover | General service tool | Removal of cover. | |
| MB990803 Steering wheel puller | General service tool | Steering wheel removal | |
MB991958
Scan tool (M.U.T.-III sub assembly)
|
MB991824-KIT
NOTE:
g: MB991826 M.U.T.-III Trigger Harness is not necessary when pushing V.C.I. ENTER key.
|
CAUTION:
For vehicles with CAN communication, use M.U.T.-III main harness A to send simulated vehicle speed. If you connect M.U.T.-III main harness B instead, the CAN communication does not function correctly. Checking diagnostic trouble code |
|
| MB991865 Dummy resistor | SRS air bag and seat belt pre-tensioner circuit check | ||
| MB991866 Resistor harness | Driver's and passenger's (front) air bag and side-air bag circuit check | ||
| MB991884 Resistor harness | Knee air bag, curtain air bag and seat belt pre-tensioner circuit check | ||
| MB991885 Adapter harness | Deployment of Knee air bag, curtain air bag and seat belt pre-tensioner inside or outside the vehicle | ||
MB991223
Harness set
|
General service tools | Checking the continuity and measuring the voltage at the SRS-ECU harness connector | |
| MB992102 Air bag inflation adapter harness | Deployment of driver's and passenger's (front) air bag module inside or outside the vehicle | ||
| MB992006 Extra fine probe | General service tool | Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector. |