LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2013 >> Lancer Evolution MR >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control System - Lancer Evolution >> On-Vehicle Service >> Cruise Control Switch Check >> Cruise Control Setting
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Cruise Control Setting

  1. Start the engine.
  2. Press the "ON/OFF" switch (cruise control system: ON, "CRUISE" indicator light: illuminated).
  3. Drive at the desired speed, above approximately 40 km/h (25 mph).
  4. Press the "COAST/SET" switch.
  5. Check to be sure that when the "COAST/SET" switch is released the speed is the constant speed.
    NOTE: If the vehicle speed decreases to approximately 15 km/h (9 mph) below the set speed because of climbing a hill for example, it is normal for the cruise control to be cancelled. When the vehicle speed becomes low-speed limit [approximately 40 km/h (25 mph)] or less, driving at constant speed will be cancelled even if the vehicle speed does not decrease 15 km/h (9 mph) or more.
    Fig 1: Locating COAST/SET Switch
    G05393809Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.