| Communication with scan tool is not possible |
Communication with all systems is impossible |
- |
Refer to CAN BUS DIAGNOSTICS TABLE
.
P.54C-18 |
| Communication with the TCL/ASC-ECU only is impossible |
1 |
INSPECTION PROCEDURE 1: COMMUNICATION BETWEEN SCAN TOOL AND THE TCL/ASC-ECU IS NOT POSSIBLE. |
| Communication with the steering wheel sensor only is impossible |
2 |
INSPECTION PROCEDURE 2: COMMUNICATION BETWEEN SCAN TOOL AND THE STEERING WHEEL SENSOR IS NOT POSSIBLE. |
| TCL/ASC-ECU power supply circuit system |
3 |
INSPECTION PROCEDURE 3: TCL/ASC-ECU POWER SUPPLY CIRCUIT SYSTEM |
| Steering wheel sensor power supply circuit system |
4 |
INSPECTION PROCEDURE 4: STEERING WHEEL SENSOR POWER SUPPLY CIRCUIT SYSTEM |
| When the ignition switch is turned to the "ON" position (engine stopped), the ASC OFF indicator dose not illuminate. |
5 |
INSPECTION PROCEDURE 5: WHEN THE IGNITION SWITCH IS TURNED TO THE "ON" POSITION (ENGINE STOPPED), THE "ASC OFF" INDICATOR DOES NOT ILLUMINATE; INSPECTION PROCEDURE 6: WHEN THE IGNITION SWITCH IS TURNED TO THE "ON" POSITION (ENGINE STOPPED), THE TCL/ASC WORK INDICATOR DOES NOT ILLUMINATE; INSPECTION PROCEDURE 7: THE "ASC OFF" INDICATOR REMAINS ILLUMINATED AFTER THE ENGINE IS STARTED; INSPECTION PROCEDURE 8: THE TCL/ASC WORK INDICATOR REMAINS ILLUMINATED AFTER THE ENGINE IS STARTED. |
| When the ignition switch is turned to the "ON" position (engine stopped), the TCL/ASC work indicator dose not illuminate. |
6 |
| The ASC OFF indicator remains illuminated after the engine is started. |
7 |
| The TCL/ASC work indicator remains illuminated after the engine is started. |
8 |
| When the ASC OFF switch is push on, ASC system does not be cancelled. |
9 |
INSPECTION PROCEDURE 9: WHEN THE ASC OFF SWITCH IS PUSH ON, ASC DOES NOT BE CANCELLED. |
| TCL/ASC system dose not operate. |
10 |
INSPECTION PROCEDURE 10: TCL/ASC SYSTEM DOSE NOT OPERATE. |