Transaxle Oil Replacement

Remove the filler plug and gasket.
Remove the drain plug and gasket, and drain the oil.
Tighten the drain plug and new gasket, to the specified torque.
Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb)
Fill with DiaQueen NEW MULTI GEAR OIL API classification GL-3, SAE 75W-80 until the level comes to the lower portion of filler plug hole.
Quantity: 2.5 dm ³ (2.6 quarts)

Fig 1: Identifying Filler Plug And Gasket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Tighten the filler plug and new gasket to the specified torque.
Tightening torque: 49 ± 19 N.m (37 ± 14 ft-lb)

Fig 2: Identifying Filler Plug Hole And Gasket
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.