Line Pressure Adjustment
- Drain the transmission fluid.NOTE: The hydraulic pressure test must be performed before attempting any adjustments.
- Remove the valve body cover.
- Turn the adjusting screw shown in the illustration to adjust the line pressure to the standard value. The pressure increases when the screw is turned counterclockwise.
NOTE: When adjusting the line pressure, adjust to the middle of the standard value range.
Standard value: 0.98 - 1.05 MPa (142 - 152 psi)
- Install the valve body cover. Pour in one quart transmission fluid.
- Repeat the hydraulic pressure test. (Refer to HYDRAULIC PRESSURE TESTS ). Readjust the line pressure if necessary.