LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2010 >> Lancer Evolution SE >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Front Axle - Lancer SPORTBACK) >> On-Vehicle Service >> Hub Bolt Replacement
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Hub Bolt Replacement

WARNING: This page is about a different variant/trim than selected.

Required Special Tools: 

  1. Remove the caliper assembly and brake disc, and retain the caliper assembly with a wire and the like to prevent from falling (Refer to FRONT AXLE HUB ASSEMBLY ).
  2. Use special tool MB991618 to remove the hub bolts.
    Fig 1: Removing Hub Bolt Using Special Tool MB991618
    G05376081Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
  3. Install the plain washer to the new hub bolt, and install the bolt with a nut while holding the hub with special tool MB990767.
  4. Install the brake disc and the caliper assembly (Refer to FRONT AXLE HUB ASSEMBLY ).
    Fig 2: Holding Hub With Special Tool MB990767
    G06471956Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals