October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
TCL Switch Check
- Remove the TCL switch. (Refer to TCL SWITCH
).
- Measure the resistance between terminal 1 and terminal 2 when the TCL switch is pressed or released. If the values measured at the time correspond to those in the table below, the resistance values are correct.
SWITCH SPECIFICATION
| SWITCH POSITION |
TESTER CONNECTION |
SPECIFIED CONDITION |
| Pressed |
1 - 2 |
Continuity (Less than 2 ohms) |
| Released |
1 - 2 |
Open circuit |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.