LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2009 >> Lancer ES, Automatic CVT >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control >> Auto-Cruise Control >> On-Vehicle Service >> Cruise Control System Operation Check >> Cruise Control "On/Off" Switch Check
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Cruise Control "On/Off" Switch Check

  1. Turn the ignition switch to the "ON" position.
  2. Check that the "CRUISE" indicator light within the combination meter illuminates when the "ON/OFF" switch is pressed (cruise control system: ON.)
  3. Press the "ON/OFF" switch again (cruise control system: OFF), and check that the "CRUISE" indicator light within the combination meter goes out.
Fig 1: Locating ON/OFF Switch - 2.0L Engine Non-Turbo, 2.4L Engine
G05903776Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Identifying Cruise Indicator Light - 2.0L Engine Non-Turbo, 2.4 Engine
G05903722Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 3: Locating ON/OFF Switch - 2.0L Engine Turbo
G05903778Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 4: Identifying Cruise Indicator Light - 2.0L Engine Turbo
G05903723Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals