LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2008 >> Outlander LS, AWD >> Repair and Diagnosis >> Brakes >> Traction Control >> Active Skid Control System (ASC) >> Diagnosis >> Diagnostic Trouble Code Procedures >> DTC U0125: G And Yaw Rate Sensor Message Time-Out Error/Message Error >> DTC Set Conditions
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

DTC Set Conditions

This DTC is set when ASC-ECU cannot receive the signal sent from the G and yaw rate sensor while the ASC-ECU supply voltage has no abnormality.

NOTE: When the ASC-ECU supply voltage has an abnormality, the low voltage code C2100 is set, and U0125 is not set.
scientia non olet · About LEMON Manuals