LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Raider SE >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Engine And Emission Control >> Switch - Speed Control >> Installation
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Switch - Speed Control: Installation

  1. Position switch to steering wheel.
  2. Install switch mounting screw and tighten to 1.7 N.m (15 in. lbs.).
  3. Plug electrical connector into switch.
  4. Install airbag module. Refer to SUPPLEMENTAL RESTRAINT SYSTEM (SRS) - SERVICE INFORMATION article.
  5. Connect negative battery cable to battery.
scientia non olet · About LEMON Manuals