LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Outlander ES >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> On-Vehicle Service >> Specification(S) >> Service Specification(S)
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Service Specification(S)

SERVICE SPECIFICATIONS

ITEMS STANDARD VALUE
Fuel pressure kPa (psi) Approximately 324 (47) at curb idle
Intake air temperature sensor resistance kΩ -20°C (-4°F) 13 - 17
0°C (32°F) 5.3 - 6.7
20°C (68°F) 2.3 - 3.0
40°C (104°F) 1.0 - 1.5
60°C (140°F) 0.56 - 0.76
80°C (176°F) 0.30 - 0.45
Engine coolant temperature sensor resistance kΩ -20°C (-4°F) 14 - 17
0°C (32°F) 5.1 - 6.5
20°C (68°F) 2.1 - 2.7
40°C (104°F) 0.9 - 1.3
60°C (140°F) 0.48 - 0.68
80°C (176°F) 0.26 - 0.36
Heated oxygen sensor output voltage V 0.6 - 1.0
Heated oxygen sensor heater resistance Ω Front 4.5 - 8.0 [at 20°C (68°F)]
Rear, Center exhaust pipe 11 - 18 [at 20°C (68°F)]
Injector coil resistance Ω 10.5 - 13.5 [at 20°C (68°F)]
Throttle actuator control motor coil resistance Ω 0.3 - 80 [at 20°C (68°F)]
Engine oil control valve coil resistance Ω 6.9 - 7.9 [at 20°C (68°F)]