LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Lancer Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Overhaul >> Specifications >> Fastener Tightening Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fastener Tightening Specifications

FASTENER TIGHTENING SPECIFICATIONS

ITEM SPECIFICATION
Transaxle Roll stopper bracket 70 +/- 10 N.m (52 +/- 7 ft-lb)
Control cable bracket 23 +/- 3 N.m (17 +/- 2 ft-lb)
Eye bolt 24 +/- 3 N.m (18 +/- 2 ft-lb)
Oil cooler feed tube 11 +/- 1 N.m (95 +/- 9 in-lb)
Input shaft speed sensor 11 +/- 1 N.m (95 +/- 9 in-lb)
Output shaft speed sensor 11 +/- 1 N.m (95 +/- 9 in-lb)
Manual control lever 22 +/- 3 N.m (16 +/- 2 ft-lb)
Park/neutral position switch (PNP switch) 11 +/- 1 N.m (95 +/- 9 in-lb)
Sealing cap 5.0 +/- 1.0 N.m (43 +/- 9 in-lb)
Valve body cover 11 +/- 1 N.m (95 +/- 9 in-lb)
Manual control shaft detente 6.0 +/- 1.0 N.m (52 +/- 9 in-lb)
Valve body mounting bolt 11 +/- 1 N.m (95 +/- 9 in-lb)
Fluid temperature sensor 11 +/- 1 N.m (95 +/- 9 in-lb)
Torque converter housing 48 +/- 6 N.m (36 +/- 4 ft-lb)
Oil pump 29 +/- 2 N.m (21 +/- 2 ft-lb)
Rear cover 23 +/- 3 N.m (17 +/- 2 ft-lb)
Transfer drive gear 34 +/- 2 N.m (25 +/- 1 ft-lb)
Output shaft jam nut 170 +/- 10 N.m (125 +/- 7 ft-lb)
Output shaft bearing retainer 29 +/- 2 N.m (21 +/- 2 ft-lb)
Components Differential drive gear 135 +/- 5 N.m (100 +/- 4 ft-lb)
Solenoid valve support 6.0 +/- 1.0 N.m (52 +/- 9 in-lb)
Valve body 11 +/- 1 N.m (95 +/- 9 in-lb)
Plate 6.0 +/- 1.0 N.m (52 +/- 9 in-lb)
scientia non olet · About LEMON Manuals