Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Bearing retainer bolt < 2.0L ENGINE > | 3.7 +/- 0.7 N.m (33 +/- 6 in-lb) |
| Connector bracket bolt < 2.4L ENGINE > | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Engine front mounting bracket nut < 2.0L ENGINE > | 67 +/- 7 N.m (50 +/- 5 ft-lb) |
| Engine front mounting bracket bolt < 2.0L ENGINE > | 44 +/- 10 N.m (33+/- 7 ft-lb) |
| Front bracket assembly bolt < 2.0L ENGINE > | 4.4 +/- 1.0 N.m (39+/- 9 in-lb) |
| Generator adjusting brace bolt < 2.0L ENGINE > | 23 +/- 2 N.m (17 +/- 1 ft-lb) |
| Generator bolt < 2.0L ENGINE > | 23 +/- 2 N.m (17 +/- 1 ft-lb) |
| Generator bolt < 2.4L ENGINE > | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Generator mounting bracket bolt < 2.4L ENGINE > | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Generator nut | 44 +/- 10 N.m (33 +/- 7 ft-lb) |
| Generator pulley nut < 2.0L ENGINE > | 118 +/- 19 N.m (87 +/- 14 ft-lb) |
| Generator terminal nut< 2.4L ENGINE > | 14 +/- 3 N.m (124 +/- 26 in-lb) |
| Harness bracket bolt < 2.4L ENGINE > | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Power steering oil line bracket bolt < 2.0L ENGINE > | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Pressure hose clamp bolt < 2.0L ENGINE > | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Regulator assembly bolt < 2.0L ENGINE > | 3.7 +/- 0.7 N.m (33 +/- 6 in-lb) |
| Starting system | |
| Magnetic switch screw < 2.0L ENGINE > | 5.8 +/- 1.6 N.m (52 +/- 14 in-lb) |
| Rear bracket screw < 2.0L ENGINE > | 3.4 +/- 1.0 N.m (30 +/- 9 in-lb) |
| Starter bolt < 2.0L ENGINE > | 30 +/- 3 N.m (23 +/- 2 ft-lb) |
| Starter bolt < 2.4L ENGINE > | 30 +/- 3 N.m (23 +/- 2 ft-lb) |
| Starter cover bolt < 2.4L ENGINE > | 9.0 +/- 2.0 N.m (80 +/- 17 in-lb) |
| Starter cover bracket bolt < 2.4L ENGINE > | 49 +/- 9 N.m (36 +/- 7 ft-lb) |
| Stator screw < 2.0L ENGINE > | 5.8 +/- 1.6 N.m (52 +/- 14 in-lb) |
| Starter terminal nut < 2.4L ENGINE > | 12 +/- 2 N.m (102 +/- 22 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt < 2.0L ENGINE > | 8.8 +/- 1.0 N.m (78 +/- 9 in-lb) |
| Camshaft position sensor bolt < 2.4L ENGINE > | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Crankshaft position sensor bolt < 2.0L ENGINE > | 9.8 +/- 2.0 N.m (87 +/- 17 in-lb) |
| Crankshaft position sensor bolt < 2.4L ENGINE > | 8.5 +/- 0.5 N.m (76 +/- 4 in-lb) |
| Ignition coil bolt | 10 +/- 2 N.m (89 +/- 17 in-lb) |
| Intake manifold stay bolt < 2.4L ENGINE > | 31 +/- 3 N.m (23 +/- 2 ft-lb) |
| Knock sensor | 23 +/- 2 N.m (17 +/- 1 ft-lb) |
| Knock sensor connector bracket bolt < 2.4L ENGINE > | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Knock sensor clamp bolt < 2.0L ENGINE > | 11 +/- 1 N.m (98 +/- 8 in-lb) |
| Spark plug | 25 +/- 5 N.m (19 +/- 3 ft-lb) |