Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT |
|---|---|---|
| Basic ignition timing at idle | 5°BTDC +/- 3° | - |
| Actual ignition timing at curb idle | Approximately 10° BTDC | - |
| CO contents % | 0.5 or less | - |
| HC contents ppm | 100 or less | - |
| Curb idle speed r/min | 680 +/- 100 | - |
| Compression pressure (200 r/min) kPa (psi) | 1,548 (225) | Minimum 1,117 (162) |
| Compression pressure difference of all cylinder kPa (psi) | - | 98 (14) |
| Intake manifold vacuum at curb idle kPa (in Hg) | - | Minimum 60 (18) |
| Cylinder block heater unit internal resistance Ω | 19 - 30 | - |
| Auto-tensioner pushrod movement mm (in) | Within 1.0 (0.04) | - |
| Timing belt tension torque N.m (in-lb) | 4.4 (39) | - |
| Auto tensioner rod protrusion amount mm (in) | 4.8-6.0 (0.19-0.24) | - |