LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2007 >> Endeavor LS, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Auto-Cruise Control >> On-Vehicle Service >> Auto-Cruise Control System Component Check >> Stoplight Switch
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Stoplight Switch

  1. Disconnect the connector.
  2. Check for continuity between the terminals of the switch.
    STOPLIGHT SWITCH CONDITION

    MEASUREMENT CONDITION TERMINAL CONNECTOR OF TESTER SPECIFIED CONDITION
    When brake pedal is depressed. 1 - 2 (for stoplight circuit) Less than 2 ohms
    3 - 4 (for auto-cruise control circuit) Open circuit
    When brake pedal is not depressed. 1 - 2 (for stoplight circuit) Open circuit
    3 - 4 (for auto-cruise control circuit) Less than 2 ohms
    Fig 1: Identifying Switch Terminals
    G04310777Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals