LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution RS >> Repair and Diagnosis >> Transmission >> Manual Trans >> Overhaul >> Specifications >> Fastener Tightening Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fastener Tightening Specifications

FASTENER TIGHTENING SPECIFICATIONS

ITEM SPECIFICATION
Roll stopper bracket mounting bolt 69 +/- 10 N.m (51 +/- 7 ft-lb)
Shift cable bracket mounting bolt 19 +/- 3 N.m (14 +/- 2 ft-lb)
Select lever mounting bolt 19 +/- 3 N.m (14 +/- 2 ft-lb)
Speedometer gear mounting bolt 4.0 +/- 1.0 N.m (35 +/- 9 in-lb)
Backup light switch 32 +/- 2 N.m (24 +/- 1 ft-lb)
Interlock plate bolt 30 +/- 3 N.m (22 +/- 2 ft-lb)
Poppet spring 32 +/- 2 N.m (24 +/- 1 ft-lb)
Control housing mounting bolt 19 +/- 3 N.m (14 +/- 2 ft-lb)
Under cover mounting bolt 7.0 +/- 1.0 N.m (61 +/- 9 in-lb)
Reverse idler gear shaft mounting bolt 48 +/- 6 N.m (35 +/- 4 ft-lb)
Clutch housing-transaxle case mounting bolt 44 +/- 5 N.m (33 +/- 4 ft-lb)
Front bearing retainer mounting bolt 19 +/- 3 N.m (14 +/- 2 ft-lb)
Select lever mounting nut 12 +/- 1 N.m (104 +/- 9 in-lb)
Stopper bracket mounting bolt 22.3 +/- 0.3 N.m (16.1 +/- 0.2 ft-lb)
Clutch release bearing retainer mounting bolt 9.8 +/- 2.0 N.m (87 +/- 17 in-lb)
Differential drive gear mounting bolt 132 +/- 5 N.m (98 +/- 4 ft-lb)
scientia non olet · About LEMON Manuals