LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution RS >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Supplemental Restraint System - Lancer Evolution >> Air Bag Module(S) And Clock Spring >> Inspection >> Clock Spring Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Clock Spring Check

If any malfunction is found in the following inspections, replace the clock spring with a new one.

  1. Check the connectors and protective tube for damage, and the terminals for deformation.
  2. Visually check the case for damage.
  3. Check to see that there is a charge (continuity) between the C-204 clock spring connector terminal and C-203 horn switch.
    Fig 1: Identifying Clock Spring
    G04298210Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Do not directly insert a probe, etc. into the terminal from the front of the connector.
  4. Insert the special tool (MB992006) from behind the driver's air bag module connector of the C-201 driver's seat.
  5. As shown in the Figure, connect the circuit tester to the special tool (MB992006) and check to see that there is a charge between the terminals.
    Fig 2: Inserting Special Tool From Behind Driver's Air Bag Module Connector Of C-201 Driver's Seat
    G04298211Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals