Fastener Tightening Specifications
FASTENER TIGHTENING SPECIFICATIONS
| ITEM | SPECIFICATION |
|---|---|
| Charging system | |
| Evaporative emission purge solenoid bolt | 9.0 +/- 1.0 N. m (80 +/- 9 in-lb) |
| Fuel pressure solenoid bolt | 9.0 +/- 1.0 N. m (80 +/- 9 in-lb) |
| Fuel rail bolt | 11 +/- 1 N. m (98 +/- 8 in-lb) |
| Generator bracket bolt (generator bolt) | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| Generator bracket bolt (intake manifold bolt) | 20 +/- 2 N. m (16 +/- 3 ft-lb) |
| Generator bracket bolt (water pump bolt) | 22 +/- 4 N. m (15 +/- 1 ft-lb) |
| Generator nut | 44 +/- 10 N. m (33 +/- 7 ft-lb) |
| Generator terminal nut | 14 +/- 3 N. m (124 +/- 26 in-lb) |
| Ground cable bolt | 5.0 +/- 1.0 N. m (44 +/- 9 in-lb) |
| Oil level gauge guide bolt | 13 +/- 1 N. m (115 +/- 9 in-lb) |
| Water pump pulley bolt | 8.8 +/- 1.0 N. m (78 +/- 9 in-lb) |
| Starting system | |
| Starter bolt | 30 +/- 3 N. m (23 +/- 2 ft-lb) |
| Starter cover bolt | 4.9 +/- 1.0 N. m (44 +/- 8 in-lb) |
| Starter cover nut | 4.9 +/- 1.0 N. m (44 +/- 8 in-lb) |
| Starter terminal nut | 13 +/- 2 N. m (111 +/- 22 in-lb) |
| Ignition system | |
| Camshaft position sensor bolt (exhaust side) | 10.5 +/- 0.5 N. m (93 +/- 4 in-lb) |
| Camshaft position sensor bolt (inlet side) | 10.5 +/- 0.5 N. m (93 +/- 4 in-lb) |
| Crankshaft position sensor bolt | 8.8 +/- 1.0 N. m (78 +/- 9 in-lb) |
| Ignition coil bolt | 10 +/- 2 N. m (89 +/- 17 in-lb) |
| Knock sensor | 23 +/- 2 N. m (17 +/- 1 ft-lb) |
| Power steering oil pressure hose bolt | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Power steering oil pump bracket bolt (cylinder block side) | 49 +/- 9 N. m (36 +/- 7 ft-lb) |
| Power steering oil pump bracket bolt (power steering oil pump side) M8 | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| M10 | 40 +/- 5 N. m (30 +/- 3 ft-lb) |
| Power steering oil pump heat protector bolt | 22 +/- 4 N. m (16 +/- 3 ft-lb) |
| Power steering oil reservoir bolt | 12 +/- 2 N. m (102 +/- 22 in-lb) |
| Spark plug | 25 +/- 4 N. m (18 +/- 3 ft-lb) |