Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | LIMIT | |
|---|---|---|---|
| Drive belt tension | Vibration frequency Hz (Reference) | 110 - 144 | - |
| Tension N (Reference) | 245 - 412 | - | |
| Actual ignition timing at idle | Approximately 5° BTDC | - | |
| Basic ignition timing at idle | 5° BTDC +/-3° | - | |
| CO content% | 0.5 or less | - | |
| HC contents ppm | 100 or less | - | |
| Curb idle speed r/min | 800 +/- 100 | - | |
| Compression pressure (250 r/min) kPa (psi) | 1,000 (145) | Minimum 637 (92) | |
| Intake manifold vacuum at curb idle kPa (in Hg) | - | Minimum 51 (15) | |
| Cylinder head bolt nominal length mm (in) | - | 99.4 (3.91) | |
| Balancer timing belt tension (When adjusted) | Deflection mm (in) | 5 - 7 (0.20 - 0.27) | - |
| Balancer timing belt tension (When replaced) | Deflection mm (in) | 5 - 7 (0.20 - 0.27) | - |
| Balancer timing belt tension (When checked) | Deflection mm (in) | 5 - 10 (0.20 - 0.39) | - |
| Timing belt tensioner adjuster rod protrusion amount mm (in) | 3.8 - 4.5 (0.15 - 0.17) | - | |
| Timing belt tensioner adjuster rod movement mm (in) | Within 1 (0.039) | - | |