LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Lancer Evolution RS >> Repair and Diagnosis >> Body & Frame >> Windows >> Body - Lancer Evolution >> Specifications >> Fastener Tightening Specifications
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Fastener Tightening Specifications

FASTENER TIGHTENING SPECIFICATIONS

ITEM SPECIFICATION
Hood 
Hood hinge bolt (hood side) 11 +/- 2 N. m (98 +/- 17 in-lb)
Hood hinge bolt (body side) 21 +/- 4 N. m (16 +/- 2 ft-lb)
Hood hinge nut (body side) 11 +/- 2 N. m (98 +/- 17 in-lb)
Hood latch bolt 9.0 +/- 2.0 N. m (80 +/- 17 in-lb)
Fuel filler lid 
Fuel filler lid bolt 5.0 +/- 1.0 N. m (44 +/- 9 in-lb)
Strut tower bar 
Strut tower bar bolt 44 +/- 5 N. m (32 +/- 4 ft-lb)
Door 
Door check bolt (body side) 11 +/- 2 N. m (98 +/- 17 in-lb)
Door check bolt (door side) 5.0 +/- 1.0 N. m (44 +/- 9 in-lb)
Door hinge bolt (body side) 27 +/- 5 N. m (20 +/- 4 ft-lb)
Door hinge bolt (door side) 21 +/- 4 N. m (16 +/- 2 ft-lb)
Door outside handle bolt 5.0 +/- 1.0 N. m (44 +/- 9 in-lb)
Door latch assembly screw 9.0 +/- 2.0 N. m (80 +/- 17 in-lb)
Door switch screw 1.5 +/- 0.5 N. m (14 +/- 4 in-lb)
Striker screw 11 +/- 2 N. m (98 +/- 17 in-lb)
Trunk lid 
Trunk lid latch assembly bolt 8.8 +/- 2.0 N. m (78 +/- 17 in-lb)
Striker bolt 8.8 +/- 2.0 N. m (78 +/- 17 in-lb)
scientia non olet · About LEMON Manuals