Service Specifications
SERVICE SPECIFICATIONS
| ITEM | STANDARD VALUE | MINIMUM LIMIT |
|---|---|---|
| Differential side bearing preload mm (in) | 0.15 -0.21 (0.0059 -0.0083) | - |
| Input shaft end play mm (in) | 0 -0.06 (0 -0.0024) | - |
| Main shaft end play mm (in) | 0 -0.06 (0 -0.0024) | - |
| Reverse idler gear end play mm (in) | 0.04 -0.10 (0.0016 -0.0039) | - |
| Distance between input shaft front bearing and thrust washer mm (in) | 167.6 -167.7 (6.5984 -6.6024) | - |
| Input shaft 6th gear bushing end play mm (in) | 0 -0.1 (0 -0.0039) | - |
| Wear on one side of shift fork pawl mm (in) | - | 0.2 (0.0079) |
| Clearance between synchronizer ring and gear mm (in) | - | 0.7 (0.0276) |
| Clearance between synchronizer ring and synchronizer cone mm (in) | - | 0.2 (0.0079) |
| Backlash between differential side gear and pinion mm (in) | 0.025 -0.150 (0.0010 -0.0059) | - |