LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2006 >> Galant GTS >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Supplemental Restraint System >> Air Bag Modules And Clock Spring >> Inspection >> Clock Spring Check
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Clock Spring Check

If any malfunction is found in the following inspections, replace the clock spring with a new one.

  1. Check the connectors and protective tube for damage, and the terminals for deformation.
  2. Visually check the case for damage.
  3. Check to see that there is a charge (continuity) between the C-306 clock spring connector terminal 1 and C-304 horn switch.
    Fig 1: Checking Protective Tube And Connectors Terminals D-308
    G04256537Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
    CAUTION: Do not directly insert a probe, etc. into the terminal from the front of the connector.
  4. Insert the special tool (MB992006) from behind the airbag module connector of the C-305 driver's side.
  5. As shown in the figure, connect the circuit tester to the special tool (MB992006) and check to see that there is a continuity between the terminals.
    Fig 2: Measuring Continuity Between C-305 Air Bag Connector Terminals
    G04256538Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals