September 30: LEMON manuals is back up on a temporary server! Slowness is possible
TCL Switch Check
- Remove the TCL switch. (Refer to TCL SWITCH
).
- Measure the resistance between terminal 1 and terminal 2 when the TCL switch is pressed or released. If the values measured at the time correspond to those in the table below, the resistance values are correct.
TCL SWITCH CHECK
| SWITCH POSITION |
TESTER CONNECTION |
SPECIFIED CONDITION |
| Pressed |
1-2 |
Less than 2 ohms |
| Released |
1-2 |
Open circuit |
Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.