Learning Procedure

Start the engine and warm-up the engine coolant temperature to 80 °C or higher.
When the engine coolant temperature is 80 °C or more, additional warm-up is not needed if the ignition switch is in the "ON" position once.
Place the ignition switch in the "LOCK" (OFF) position and stop the engine.
After 10 seconds or more, start the engine again.
For 10 minutes, idle the engine under the conditions shown below and then confirm the engine idles normally.
- Transaxle: Neutral (P range on vehicles with A/T)
- A/C and other ignition-related items: OFF
- Engine coolant temperature: 80 °C or more
  NOTE: When the engine stalls during idling, check the dirtiness (on the throttle valve) of the throttle body and then perform the service from Procedure 1 again.