LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Montero >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Auto-Cruise Control) >> Special Tools
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Special Tools

WARNING: This page is about a different car, the 2006 Mitsubishi Montero. However, it is still accessible from the selected car via links, so may be relevant.
SPECIAL TOOLS SPECIFICATIONS

TOOL TOOL NUMBER AND NAME SUPERSESSION APPLICATION
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
G04265213G04265214G04265215G04265216G04265217G04265218G04265219
 MB991958
  1. MB991824
  2. MB991827
  3. MB991910
  4. MB991911
  5. MB991914
  6. MB991825
  7. MB991826

MUT-III sub assembly
  1. Vehicle communication interface (V.C.I.)
  2. MUT-III USB cable
  3. MUT-III main harness A (Vehicles with CAN communication system)
  4. MUT-III main harness B (Vehicles without CAN communication system)
  5. MUT-III main harness C (for Daimler Chrysler models only)
  6. MUT-III measurement adapter
  7. MUT-III trigger harness
 MB991824-KIT
NOTE: G: MB991826 MUT-III trigger harness is not necessary when pushing V.C.I. ENTER key.
 Checking diagnostic trouble codes
CAUTION: If you connect MUT-III main harness A to a vehicle without CAN communication system to use the MUT-III, a pulse signal may interfere with the simulated vehicle speed lines, thus causing the MUT-III inoperative. Therefore, use the MUT-III main harness B (MB991911) instead.
G04265220G04265221G04265222G04265223
G04265220G04265221G04265222G04265223
G04265220G04265221G04265222G04265223
G04265220G04265221G04265222G04265223
 MB991223
  1. MB991219
  2. MB991220
  3. MB991221
  4. MB991222

Harness set
  1. Test harness
  2. LED harness
  3. LED harness adaptor
  4. Probe
 General service tools Checking the continuity and measuring the voltage at the harness connector
G04265224
 MB992006
Extra fine probe		 General service tool Continuity check and voltage measurement at harness wire or connector for loose, corroded or damaged terminals, or terminals pushed back in the connector.
G04265225
 MB991658
Test harness		 Tool not available Checking throttle position sensor
scientia non olet · About LEMON Manuals