Fastener Tightening Specifications

FASTENER TIGHTENING SPECIFICATIONS

ITEM		SPECIFICATION
Charging system
Evaporative emission purge solenoid bolt		9.0 +/- 1.0 N.m (80 +/- 9 in-lb)
Fuel pressure solenoid bolt		9.0 +/- 1.0 N.m (80 +/- 9 in-lb)
Fuel rail bolt		11 +/- 1 N.m (98 +/- 8 in-lb)
Generator bolt		22 +/- 4 N.m (16 +/- 3 ft-lb)
Generator brace bolt (water pump bolt)		23 +/- 3 N.m (17 +/- 2 ft-lb)
Generator brace bolt		22 +/- 4 N.m (16 +/- 3 ft-lb)
Generator brace stay bolt (intake manifold bolt)		20 +/- 2 N.m (15 +/- 1 ft-lb)
Generator brace stay nut (intake manifold nut)		36 +/- 6 N.m (27 +/- 4 ft-lb)
Generator nut		44 +/- 10 N.m (33 +/- 7 ft-lb)
Generator terminal nut		14 +/- 3 N.m (124 +/- 26 in-lb)
Ground cable bolt		5.0 +/- 1.0 N.m (44 +/- 9 in-lb)
Oil level gauge guide bolt		13 +/- 1 N.m (115 +/- 9 in-lb)
Water pump pulley bolt		8.8 +/- 1.0 N.m (78 +/- 9 in-lb)
Starting system
Starter bolt		30 +/- 3 N.m (23 +/- 2 ft-lb)
Starter cover bolt		4.9 +/- 1.0 N.m (44 +/- 8 in-lb)
Starter cover nut		4.9 +/- 1.0 N.m (44 +/- 8 in-lb)
Starter terminal nut		13 +/- 2 N.m (111 +/- 22 in-lb)
Ignition system
Camshaft position sensor bolt		10.5 +/- 0.5 N.m (93 +/- 4 in-lb)
Crankshaft position sensor bolt		8.8 +/- 1.0 N.m (78 +/- 9 in-lb)
Ignition coil bolt		10 +/- 2 N.m (89 +/- 17 in-lb)
Knock sensor		23 +/- 2 N.m (17 +/- 1 ft-lb)
Power steering oil pressure hose bolt		12 +/- 2 N.m (102 +/- 22 in-lb)
Power steering oil pump bracket bolt (cylinder block side)		49 +/- 9 N.m (36 +/- 7 ft-lb)
Power steering oil pump bracket bolt (power steering oil pump side)	M8	22 +/- 4 N.m (16 +/- 3 ft-lb)
	M10	40 +/- 5 N.m (30 +/- 3 ft-lb)
Power steering oil pump heat protector bolt		22 +/- 4 N.m (16 +/- 3 ft-lb)
Power steering oil reservoir bolt		12 +/- 2 N.m (102 +/- 22 in-lb)
Spark plug		25 +/- 4 N.m (18 +/- 3 ft-lb)