LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2005 >> Endeavor LS, AWD >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Diagnosis >> Automatic Transaxle Diagnosis >> How To Initialize A/T Learning Value >> Initialization Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Initialization Procedure

  1. Shift the selector lever to the P range and turn the ignition switch to the LOCK (OFF) position. Then, connect the MUT-III to the diagnosis connector.
  2. Initialize the learned value on the initialization screen.
  3. After this initialization, make the system learn the idling in accordance with "Learning procedure for idling in MPI engine" (Refer to PRECAUTIONS BEFORE SERVICE ).
scientia non olet · About LEMON Manuals