LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Outlander LS, AWD >> Repair and Diagnosis (Single Page) >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 Lancer 2.0L Turbo >> Pattern 17 >> Test Procedure
October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Drive the vehicle with the accelerator pedal fully depressed for 5 seconds. (During the monitor)
  3. Stop at safe place and turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.