LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Mitsubishi >> 2004 >> Lancer Evolution >> Repair and Diagnosis >> General Information >> OBD-II Drive Cycles >> Drive Cycle Procedures >> 2011-12 Lancer 2.0L Turbo >> Pattern 23 >> Test Procedure
July 1: So it begins. Don't worry, this is not in the correct legal jurisdiction!

Test Procedure

  1. Start the engine with all the accessories switched OFF.
  2. Let the engine idle at the engine speed less than 1,000 r/min for 15 seconds. (During the monitor)
  3. Turn the ignition switch to "LOCK" (OFF) position.
  4. Start the engine and do Steps 1 to 3 again.
  5. Confirm that the diagnostic trouble code (DTC) is not output.
scientia non olet · About LEMON Manuals